Project Description

Extension module for the Preon32 radio module

USB port

  • In-System Programming and Data Communication

  • Connection as virtual COM port under Windows/Linux

  • Micro USB socket

Male connectors for easy expansion

  • 2.54 mm pitch – suitable for hole grid boards

  • Interfaces like USART, SPI, I²C or CAN

  • Access to resources of the radio module Preon32

Power supply

  • 2x ultra low power linear regulators with 3.3V output voltage – separate analog/digital power supply

  • 5 V input voltage via USB socket

  • External supply input with 3,6V to 13,2V

Other peripherals

  • 4x LEDs (green, yellow, red, amber)

  • x buttons like reset and user function

compact dimensions of 32 x 33 x 14mm (LxWxH)

Made in Germany by Virtenio
Data Sheet


The “Preon32Shuttle” is an evaluation module for the radio module “Preon32”. The “Preon32Shuttle” integrates the “Preon32” in its compact design with SMD pads in the LGA arrangement (Land Grid Array) and makes the interfaces on pin headers more easily accessible.

The “Preon32Shuttle” contains external components such as LEDs, push-buttons and connector blocks for the fast assembly of prototypes in combination with your own peripherals. The integrated USB interface enables the system to be programmed, sensor data to be read out and configuration data to be written.

For the connection of external peripherals, a variety of extensive interfaces such as CAN, I²C, SPI, USB bus or digital input/output pins are available via the pin headers.

The integrated power supply circuit allows the user to operate the module from an external battery voltage as well as via the USB connection. The linear regulator used has a wide input voltage range from 3.6V to 13.2V.

Technical data

Technical data
Ports 1x Micro-USB port
1x 2-pin Molex PicoBlade socket for external battery
2x 16-pole male connectors with 2.54mm pitch
Single Chip USB 2.0 Full-Speed to USART Bridge, up to 931.6 KBaud to PC
4x SMD LEDs (green, yellow, red, amber)
1x reset button
1x user button
Function on pin headers with integrated Preon32
Serial interfaces 1x USB 2.0 Full-Speed
1x CAN interface (2.0B Active)
2x SPIs up to 18 Mbit/s
2x USARTs synch./asynch. up to 4.5 Mbit/s
1x I²C up to 400 kBit/s
Analog interfaces 2 × 12-bit A/D converter, 1 MSPS, 11 channels
2 × 12-Bit D/A converter
Additional interfaces 27x digital input or output pins (GPIOs)
15x external interrupt inputs
General information about the module
Dimensions 32 x 33 x 14mm (LxWxH)
Supply voltage 3,6V- 13,2V
Product request

Interesse an diesem Produkt?

Kontaktieren Sie Virtenio um mehr Informationen zu erhalten oder um das Produkt zu bestellen!
Tagesaktuelle Preise sendet Ihnen Virtenio umgehend zu.
Product request