Project Description

PreonCube Condition CO2 Name

Cube for measuring CO2 concentration in the air with wireless communication

  • Mobile, self-sufficient radio measuring point with external measuring sensor

  • Determination of the carbon dioxide concentration in the ambient air

  • Simple determination of measured values, intermediate storage and radio transmission (min. 128 bit AES encryption)

  • Convenient measured value analysis and data export in the PreonLive online portal my.virtenio.com

  • Runtime up to 50 days with lithium-ion battery

  • Modular compatibility with all Virtenio Cubes and Gateways

  • Robust housing (IP65) with pressure compensation valve

  • Compact dimensions of 65 x 65 x 162 mm (L x W x H)

CO2 Icon
PreonCube Condition CO2
Data Sheet

Description

The PreonCube Condition CO2 is a wireless radio measuring point with external CO2 sensor. Due to its compact design, the Cube is very well suited for monitoring rooms, buildings, warehouses, cabinets or hard-to-reach environments. Depending on the selected measuring interval, the Cube uses its sensor to record data on the CO2 concentration and can be used with or without a power supply unit. Depending on requirements, it transmits the measured values at customer-specific intervals and a suitable radio protocol to other measuring points or directly to radio gateways. From the optionally available gateways, the data is transferred to the PreonLive online portal where it can be analyzed and exported. So you can monitor your remote CO2 cubes from any PC, smartphone or tablet with Internet access and have an overview of their current measured values at all times. The radio traffic light PreonCube Condition Signal Light is available to match the PreonCube Condition CO2. The three-stage traffic light can be operated within radio range of the measuring point and, depending on the CO2 concentration, signals the current measured value range with different colours and thus forms a CO2 traffic light.

Sensors

An external sensor with infrared technology (NDIR) is used to record the data. This is equipped with a filter cap and is located on the upper side of the cube. It measures with high accuracy the concentration of C02 in ambient air from 0ppm to 5000 ppm.

Applications

  • Areas of application: seminar rooms, buildings, storage, occupational health and safety, indoor climate

  • Use: Monitoring of buildings, halls, rooms, cabinets or showcases, etc.

  • Monitoring, detection, control and alarming

  • Random checks or long-term measurements

Technical specifications

General information
Dimensions 65 x 65 x 162 mm (L x W x H)
Weight 228 g
Case polycarbonate
Safety class IP65 with pressure compensation valve
Power supply Lithium ion battery with 2350mAh capacity; USB power supply
Operating modes Battery; power supply with 5V@500mA
Operating time up to 50 days without recharging (depending on configuration)
Memory Flash, non-volatile
Operating temperature -20°C to +50°C / 0°C to +40°C in power supply mode
Interaction Non-contact reed switch, LED (two-color)
Connection Micro USB connector for USB power supply
Radio communication
Radio frequency 2.4 GHz , license free ISM band
Radio standard IEEE 802.15.4
Range (up to) outdoor 300m / indoor 30m
Security at least 128 bit AES
Radio protocol IEEE 802.15.4 (P2P); 6LoWPAN with duty cycling (via SW update)
Radio channels 16
Transmission interval 15 min (standard, programmable)
CO2
Sensor digital CO2 sensor, non-dispersive infrared technology (NDIR)
Measuring interval 15 min (standard, programmable)
Measuring range 0ppm to 5000ppm
Temperature dependency Typ. 2ppm CO2/°C (0°C to 50°C)
Accuracy < +/- (50ppm +3% of measured value)
Calibration Autocalibration, maintenance-free
Standards
Electrical safety EN 62368 1, EN 62311
EMC EN 61326-1, EN 301489-1/-17
Radio EN 300 328
RoHS EN 50581
Product request

Interested in this product?

Contact Virtenio for more information or to order the product!
Virtenio will send you daily updated prices immediately.
Product request

Are you looking for another PreonCube?